The flexible submersible pump makes dewatering & drainage a breeze. Designed to pump semi-clean water & ideally suited for little spaces or narrow applications such as wells & ditches.
Also used for:
Manholes
Tanks
Drainage
Pool excavations
Waste transfer
Water transfer

Machine Description/Features:

The 2″ Flexi Trash Pump is made with cast iron casing with wide passages to allow debris (up to 25mm) to pass through and can allow fluids containing up to 60% solids.  The main shaft is made from corrosion resistant high quality 316 stainless steel.   Attached to a Drive Unit, these pumps will do a variety of jobs in agricultural, construction and mining applications.
Features:
Cast Iron casing
No suction hose required
Quick action flexshaft coupling with 2 dog drive (Dynapac coupling)
Includes lay-flat (discharge) hose
MOVABLE SPIRAL SECTION – Supports the cable when draping over sharp hole lips to prevent kinking

Machine Specifications:

• Weight:                          33kg
• Volume Max:                 933L/min  56000 L/Hr
• Inlet & Discharge:          2″/ 50mm
• Total Head:                   29m

Consumables sold and other equipment normally on hire with this:

Layflat Hose
Drive Unit

A pump designed to handle fluids that may contain a high level of solid content such as trash, mud, natural debris like leaves or twigs, waste products at fish or animal processing plants or fluids containing sand, gravel, crushed stone & concrete chips at construction sites.

Machine Description/Features:

• Cast iron impeller for maximum durability.
• Easy accessible cover for cleaning if it becomes clogged, without disconnecting hose.
• Comes with suction hose, strainer & outlet hose.

Machine Specifications:

Engine (petrol) 6.5HP
Intake & outlet port size 3 inch/75mm
Litres per minute 1300
Solid waste handling Up to 25mm
Suction hose length 6m

Often referred to as Mud or Sludge Pumps, diaphragm pumps are designed to pump mud, slurry, sewage and thick liquids that have the ability to flow.

Machine Description:

Thermoplastic Santoprene Diaphragm
Modular Component Design Permits Easy Maintenance and Clean out.
Delivers up to 90 GPM
90° Rotatable Base on All Models
Sand Cast Aluminium Construction for Portability and Durability

Machine Specifications:

Maximum solids Handling Capacity: 1-5/8” Diameter
Inlet and outlet size: 3” / 75mm
Dimensions: L106 x W7 6x H56cm

Consumables sold and other equipment normally on hire with this:

Lay-flat hose and suction hose.
Safety Equipment suggested:

Emptying Flooded Basements, Garages etc.
Drainage & Other Industrial Applications.
Disposal Of Non-Sewage Effluent Water From Septic Tanks.
Emptying of swimming pools.

Machine Description:

Drainage Submersible Pumps for professional use, particularly reliable with generous motor specification and hard-faced mechanical seal. These pumps are easy to install and dependable when used in fixed automatic installations. A purpose built sump is recommended for fixed installations (minimum dimensions 500 x 500 x 500 mm) to provide total drainage and allow correct operation of the float switch. The adjustable float switch is supplied as standard on single phase models and automatically starts the pump when the fluid reaches a pre-set level, stopping it once the fluid has been emptied. Installing a suitable non- return valve on the delivery pipe prevents reverse flow when the pump stops.
Maximum operating depth 5m below water level
Fluid temperature up to + 40 °C
Maximum passage for suspended solids Ø 10mm
Maximum emptying level 15mm from the bottom

Machine Specifications:

Power: 0.60kW/0.85HP
Flow Rate: Up To 400 L/min (24.0 m³/hr)
Dynamic Head: Up To 17m
Dimesions: 217x320mm
Weight: 12.0kg

Consumables sold and other equipment normally on hire with this:

Layflat hose.

Centrifugal Pumps are ideal clean water pumps for construction and industrial dewatering, utilities, manhole and vault draining, marine, landscape irrigation, mobile plant watering.

Machine Specifications:

Engine Displacement: 196cc
Inlet hose diameter: 50mm
Outlet hose diameter: 50mm
Suction Height: 7m
Net Weight: 24kg

Consumables sold and other equipment normally on hire with this:

Layflat hose and suction hose.

Centrifugal Pumps are ideal clean water pumps for construction and industrial dewatering, utilities, manhole and vault draining, marine, landscape irrigation, mobile plant watering.

Machine Specifications:

Engine Displacement: 240cc
Inlet hose diameter: 75mm
Outlet hose diameter: 75mm
Suction Height: 7m
Net Weight: 28kg

Consumables sold and other equipment normally on hire with this:

Layflat hose and suction hose.

The flexible submersible pump makes dewatering & drainage a breeze. Designed to pump clean water & ideally suited for little spaces or narrow applications such as wells & ditches.

Machine Description/Features:

• The pump is driven with a 6.5hp petrol engine (not included in hire price)
• Cast aluminium pump body for durability.
• Cast iron impeller for maximum durability.
• No priming needed.
• Quick release drive coupling.
• Comes with discharge hose.

Machine Specifications:

Engine (petrol) not included in hire price 6.5HP
Discharge diameter 2”/50mm or 3”/75mm
Flow rate 500L/min
Hose length 6 metres
Max. suction lift 12 metres