• Fastening drywall track to floors, walls and ceilings on concrete, solid masonry or steel
• Fastening mesh, membranes or foil with special washer holders to concrete walls
• Fastening wall tie connections to concrete, solid masonry or steel – use of the special washer holder is recommended
• Suitable for various light-duty fastening applications on concrete, solid masonry or steel
• Fastening cables, conduits or various light electrical installations – use of the ME nailer nose is recommended

Features:

• Second generation of Hilti’s combustion-free direct fastening technology – for high-quality, reliable fastening to concrete, steel and some types of solid masonry.
• Combustion-free operation – no gas cans or powder cartridges to store and dispose of.
• Drives up to 800/500/400 fasteners with a single battery charge (depending on B22 battery model – 5.2 Ah, 3.0 Ah or 2.6 Ah).
• Magazine capacity of 30 nails.
• Engineered for high productivity – fastening rate of 1.3 nails per second.

Consumables sold and other equipment normally on hire with this:

Nails, special purpose nails.

Safety Equipment suggested:

Safety goggles.

Watch this Nailgun in Action:

Leveling (transferring heights, pouring concrete, excavation…)
Aligning (transferring building lines, aligning columns, facades)
Grading (ramps, parking lots, pipes)
Squaring

Features that make this level unique vs traditional Dumpy Levels:

Fast, automatic laser alignment at up to 150 m – Auto Alignment System makes this a one-person task.

Built to last – engineered to US Military standards (MIL-STD-810G) with head-mounted bumpers, four shock-absorbing handles and IP66 protected housing to maintain laser accuracy in rough jobsite conditions.

Comes with Hilti Calibration Certificate.

Watch the operation of the Hilti Lazer level on Youtube by clicking below.

Spanner specifically designed to easily install and maintain single circuit heating elements used normally with warm water geysers.

The Bitumen Sprayer can be used for both open areas and for patch work.

Machine Description/Features:

The hand operated pump is double acting with ball valves and an air chamber is incorporated to ensure an even and balanced discharge.
The flow is regulated by the stroke. It is of a special construction to handle cold bituminous emulsions and can be easily dismantled for maintenance.
The strainer is positioned to keep the pump fully primed when the operation is intermittent. Always ensure to flush the pump if being left to stand for any length of time. The unit comes on a robust steel chassis with 4 x semi-solid rubber tyred wheels and is suitable for a 210lt drum.
It comes complete with a spray lance with 3m of hose, control valve and 2 X 65º nozzles and a suction probe and hose.

Machine Features & Benefits:

High production – many times the daily output of hand sprayers
Sprays cold emulsion with ease
High efficiency cuts labour costs
Light, manoeuvrable, compact
Eliminates ‘splotching’
Far greater economy through more even distribution
Gives smooth, even spray
Easily transportable
Robust construction takes rough handling
No operator fatigue
Unique Bypass System

Machine Specifications:

LANCE – 5m oil-resistant delivery hose fitted to 2m lance including handle grip, shut-off valve and 2 only 65º flat spray adjustable nozzles.
PUMP– Gear type pump, direct drive from output shaft of engine reduction gear through a flexible coupling. Output when spraying bitumen emulsion is approximately 18lt per minute.

Consumables sold and other equipment normally on hire with this:

Asphalt Compactor

Safety Equipment suggested:

Eye goggles

• A tape measure or measuring tape is a flexible form of ruler.
• It is a common measuring tool. Its design allows for a measure of great length to be easily carried in pocket or toolkit and permits one to measure around curves or corners.

Machine Description/Features:

• It consists of a ribbon of cloth, plastic, fiber glass, or metal strip with linear-measurement markings.
• Retractable.
• Rubber casing for protection

Machine Specifications:

• Length of tape: 50m

Tarpaulins have multiple uses, which includes shelter from the elements wind, rain, or sunlight, a ground sheet when camping,

Machine Description/Features:

Large sheet of strong, flexible, water-resistant or waterproof material, polyester coated with urethane, or made of plastics such as polyethylene.

Machine Specifications:

6m x 6m

Consumables sold and other equipment normally on hire with this:

Mushroom Patio Heater & LP gas.

A torque wrench is a tool used to precisely apply a specific torque to a fastener such as a nut or bolt. It is usually in the form of a socket wrench with special internal mechanisms.

Machine Description:

It was invented by Conrad Bahr in 1918 while working for the New York City Water Department. It was designed to prevent over tightening bolts on water main and steam pipe repairs underground.
A torque wrench is used where the tightness of screws and bolts is crucial. It allows the operator to measure the torque applied to the fastener so it can be matched to the specifications for a particular application. This permits proper tension and loading of all parts. A torque wrench measures torque as a proxy for bolt tension. The technique suffers from inaccuracy due to inconsistent or uncalibrated friction between the fastener and its mating hole. Measuring bolt tension (bolt stretch) is more accurate but often torque is the only practical means of measurement.

• Trestles are generally used to support working platforms of relatively low height as a more convenient alternative to scaffolding.

Machine Description/Features:

• It can be used in conjunction with wooden or metal scaffolding boards to complete a working platform.

Machine Specifications:

• Stands closed at 1.4m and opens at 2.2m
• Sturdy and robust metal frame
• Loading capacity: 460kg on x 4 scaffold boards

Add on hires:

• Scaffold boards

Safety equipment suggested:

Hard hats/Safety helmets

Agricultural fencing applications or fencing a small area or yard.

Machine Description:

The two hooks attach to each end of the wire or post to be stretched. A ratchet with a non-return link is used to pull the wires towards each other so that it can be connected to each other once the desired strain is achieved.

Machine Specifications:

Weight: About 3kg

Lead lights are used in the automotive industry.

Machine Description:

The handy hook on the lead light is essential where a hands-free application is desired. Mechanics use lead lights when inspecting the undercarriage of a vehicle or hanging for a top down application.

Machine Specifications:

Weight: +- 1.5kg
Length of lead: 2.5m

Consumables sold and other equipment normally on hire with this:

Trolley jack.
Extension lead

Safety Equipment suggested:

Eye goggles for protection.