Professional mixer for tile adhesives, plaster, cement, chalk and paints.

Machine Specifications:

Equipped with:
– Single phase engine 230V~50Hz 1600W
– Electronic rotation speed variator up to 6 levels
– Two speed mechanical gear lever
– Running freely Vel.(1): 180/380 min-1
– Running freely Vel.(2): 300/650 min-1
– Whip Ø160 mm.
– M14 x 2 connection
– Ergonomic handle

Safety Equipment suggested:

Dust Mask, Eye Protection Goggles

Use Hire-It’s new Italian Universal Automatic mixer for tile adhesives, cement, grout, paint & epoxy resins.

Machine Description:

It mixes up to 50 kg of material independently of an operator, saving you time and money!.
Renders a Homogeneous paste and without lumps.
The machine is easy to move.
An automatic safety switch prevents the motor to start when the mixing head is completely raised up

Machine Specifications:

• Single-phase motor 230V~50Hz 1,6 Hp / 1,2 Kw
• PET Bucket – 65 Lt.
• Mixing capacity 50 Kg.
• Weight 24kg.

Consumables sold and other equipment normally on hire with this:

Spades, Shovels, Wheelbarrows.

Safety Equipment suggested:

Safety Glasses, Dust Mask.

View the operation of this mixer by clicking below:

For incredibly quick grinding of concrete or removal of coatings from concrete.
For surface grinding on concrete, screed, removing tile adhesives.
Removing coatings (paint, adhesive remains etc.) from concrete.
For use where dustless grinding is required or in conjunction with a larger floor-grinding machine that cannot reach edges.

More Productive than conventional grinder and cup methods due to:

1. a) Virtually dustless when used with the VC 40-U HILTI Vacuum Cleaner – your worker can work longer periods of time b) Incredibly quick grinding of concrete or removal of coatings from concrete due to 150mm width.
2. b) Safety – Silica Dust is a serious health hazard on sites.

Machine Specifications:

• Grinding wheel diameter: 150 mm
• Weight according to EPTA Procedure 01/2003: 4.1 kg
• Base material: Concrete, Coatings, Adhesive, Epoxy, Cement
• Grinding wheel diameter: 150 mm
• Weight according to EPTA Procedure 01/2003: 4.1 kg
• Base material: Concrete, Coatings, Adhesive, Epoxy, Cement

Consumables sold and other equipment normally on hire with this:

Hilti Vacuum Cleaner with HEPA Filter VC 40-U.

Safety Equipment suggested:

Dust Mask, Eye Protection Goggles.

Watch the operation of the DG150 here by clicking below:

• The TCG250 is a heavy duty single head grinder for levelling and preparation of small to medium areas.
• Removal of coatings and adhesives.
• Preparation for new coatings.
• Repairing rain damaged Concrete.
• Polishing of concrete and other materials.
• Suitable for medium to large jobs.

Machine Description:

The flexible grinding head ensures maximum contact and usage of the diamond while working over rough surfaces.
Robust design and optimised grinding pressure while maintaining overall compactness together with manoeuvrability make the TCG250 the choice for a wide range of jobs. It is the ideal partner for both specialist contractors and the hire industry.

Machine Specifications:

• 250mm Grinding Diameter.
• Optimised grinding pressure and speed for high productivity.
• Angled dust port for virtually dust free working when used with correct Hepa Vacuum Cleaner.

Consumables sold and other equipment normally on hire with this:

250mm Diamond Disk.

Safety Equipment suggested:

Dust mask Safety Goggles, Ear Muffs.

View this machine in action by clicking below:

• Fastening drywall track to floors, walls and ceilings on concrete, solid masonry or steel
• Fastening mesh, membranes or foil with special washer holders to concrete walls
• Fastening wall tie connections to concrete, solid masonry or steel – use of the special washer holder is recommended
• Suitable for various light-duty fastening applications on concrete, solid masonry or steel
• Fastening cables, conduits or various light electrical installations – use of the ME nailer nose is recommended

Features:

• Second generation of Hilti’s combustion-free direct fastening technology – for high-quality, reliable fastening to concrete, steel and some types of solid masonry.
• Combustion-free operation – no gas cans or powder cartridges to store and dispose of.
• Drives up to 800/500/400 fasteners with a single battery charge (depending on B22 battery model – 5.2 Ah, 3.0 Ah or 2.6 Ah).
• Magazine capacity of 30 nails.
• Engineered for high productivity – fastening rate of 1.3 nails per second.

Consumables sold and other equipment normally on hire with this:

Nails, special purpose nails.

Safety Equipment suggested:

Safety goggles.

Watch this Nailgun in Action:

A small power trowel for producing a high specification finish on concrete. The trowel is capable of wall to wall trowelling. Mainly used for final screeds and the narrow design enables trowelling through doorways.
Power floats are used to smooth and level the surface of newly poured concrete to an exceptionally high tolerance.
It constructs a hard-wearing finished surface, suitable for high traffic areas both foot and fork lift dependent on depth. These machines are fitted with circular pans to help smooth the concrete before metal blades are rotated over the surface adjusting the tilt to achieve a hardened surface. Before the concrete can be power floated it has to be left to harden.

Machine Description/Features:

A power trowel (also known as a “power float”, “helicopter” or “trowel machine” or “whirlybird”) is a piece of light construction equipment used by construction companies and contractors, to apply a smooth finish to concrete slabs.
Speed rotating control and tilting adjuster conveniently located on handle for easy access and control.
Fitted with a dead man switch safety feature for quick shut down

Machine Specifications:

Petrol engine: 160cc (5.5hp)
Working diameter: 600mm
Weight: 75kg

Consumables and other equipment normally on hire with this:

• We stock comprehensive range of concrete preparation and finishing product such as
• Concrete mixers
• Pokers & drive units
• Wheel barrows
• Spades & shovels
• Concrete cutters
• Replacement floating or finishing blades available for the power float

Safety Equipment suggested:

Safety boots are recommended as floated concrete can be very slippery

Leveling (transferring heights, pouring concrete, excavation…)
Aligning (transferring building lines, aligning columns, facades)
Grading (ramps, parking lots, pipes)
Squaring

Features that make this level unique vs traditional Dumpy Levels:

Fast, automatic laser alignment at up to 150 m – Auto Alignment System makes this a one-person task.

Built to last – engineered to US Military standards (MIL-STD-810G) with head-mounted bumpers, four shock-absorbing handles and IP66 protected housing to maintain laser accuracy in rough jobsite conditions.

Comes with Hilti Calibration Certificate.

Watch the operation of the Hilti Lazer level on Youtube by clicking below.

The Manual Shotcrete sprayer is for small to medium sized plastering/shotcrete jobs.  It can be used to spray mortar, plaster, small scale shotcrete, papercrete, earthen mixes and more.  Many of our customers use it for faux rock and vertical walls.  It is also a great stucco tool for plastering a stucco house, for traditional plastering such as one-coat or three-coat stucco, for GFRC, and stamped concrete.  It is very efficient for many alternative building methods like strawbale, earth bag, insulated panels and thin shell / ferrocement.   Watch this video: Video with Shotcrete sprayer in action

Machine Description:

You can hire the standard 100L air compressor from us to use the shotscrete sprayer.  More air is better, bigger tanks are better. The goal is to let the compressed air do the work for you. If you have at least an 100L compressor, it is a good idea to maximize the air flow and throwing power with 1/2″ ID air hose and fittings.
It is also very simple to clean. Just dip the plaster sprayer two or three times in a bucket of water and then let the air through.
It is possible to cover 60 m2 in one hour.
Made with stainless steel and brass.

Machine Specifications:

Own Weight:  2.45kg
Weight with container filled up till upper edge with plaster ready for use. Total weight:    9.2 kg
Maximum working pressure: 6 Bar.

Time required to empty the full container at a pressure of 6 bar
– emptying up to 5 cm from upper edge: 2.1 seconds
– emptying up to 10 cm from upper edge: 3.3 seconds
– complete emptying 4.5 seconds

Complete emptying on a pressure of 4 bar: 6 seconds.

Consumables sold and other equipment normally on hire with this:

Compressor 100L
Dust Mask
Goggles

Safety Equipment suggested:

Dust Mask
Goggles

The TCG500 dual head surface grinder is suitable for larger grinding jobs where the single disk floor grinder is too small. The cost advantage is that one operator does twice the surface grinding in the same time. Main applications include:
• Grinding of large concrete surfaces. (Shopping malls, hospitals…)
• Removal of old coatings and contaminates. (Factory floors, car parks…)
• Scarifying to remove oil/dirt surfaces. (Airports, car parks…)
• Ice removal from cold store floors. (Food processing plants…)
• Grinding Terrazzo floor tiles.
• Grinding resinous based coatings.
• Smoothing and levelling concrete before applying a new coating.

Machine Description:

• Flexible joint ensures an even grind
• Vibration reduced handle for operator comfort
• Flexible holding disc allows the use of:
– Carborundum Blocks
– Wire Brushing
– Diamond Discs

Machine Specifications:

Power input: 3HP, 2.2KW, 220V.
Machine weight: 114kg
Length: L-1220mm x W-660mm x H-914mm

Consumables sold and other equipment normally on hire with this:

Carborundum Blocks.
Diamond Disks 250mm diameter
Extension Leads
Safety Equipment suggested:
Eye Goggles
Ear Muffs
Dust Mask

Use for concrete compaction of foundations, walls, columns, and wherever high frequency concrete vibration is required.  Uniformity of compaction can be achieved with these internal vibrators with integrated inverters because the motor speed remains constant no matter what the properties of the freshly mixed concrete. The result: a job uniformly well done. In addition they prove their worth thanks to their maximum compaction diameter and topmost compaction performance.

Machine Description:

Our Pokers range in size from 28mm, 38mm, 45mm and 60mm.

Machine Specifications:

• Head length: 400mm
• Frequency: 200Hz
• Vibration level: 4m/s² 12,000 per minute
• Weight: 19.8kg
• Vibrations: 12000 per minute

Consumables sold and other equipment normally on hire with this:

Concrete Mixers, Wheelbarrows, Spades & Shovels.

Safety Equipment suggested:

Hardhats, Eye Protection Goggles, Safety Boots.